DB21
DB21M
DB21
,DB21M
start_gui_tools
, ROS tools and no-vnc
DB17
DB18
DB19
Modified 2021-09-26 by tanij
Nothing
Knowledge of Duckiebot configuration naming conventions and their respective functionalities.
We define the different Duckiebot configurations, from the first DB17
used in the MIT course 2.166 in 2017 to the latest available.
Duckiebots DB18
onwards can be obtained from the Duckietown project store.
Modified 2021-10-30 by tanij
Model | Computation | Sensing | Actuation | Memory | Power | Notes |
---|---|---|---|---|---|---|
DB17 | RPI3 | Camera | 2x DC motors, 5x RGB LEDs | 32GB | Off-the-shelf | |
DB18 | RPI3B+ | Camera | 2x DC motors, 5x RGB LEDs | 32GB | Duckie-power bank | addressable LEDs |
DB19 | RPI3B+ | Camera, Wheel Encoders | 2x DC motors, 5x RGB LEDs | 32GB | Duckie-power bank | |
DB21M | JN2GB | Camera, Wheel Encoders, ToF, IMU | 2x DC motors, 4x RGB LEDs, Screen | 32GB | Duckiebattery | Chassis v1 |
DB21 | JN2GB / JN4GB | Camera, Wheel Encoders, ToF, IMU | 2x DC motors, 4x RGB LEDs, Screen | 64GB | Duckiebattery | Chassis v2 |
Legend:
DB21
Modified 2021-09-26 by tanij
The Duckiebot DB21
debuted with the “Self-Driving Cars with Duckietown” massive open online course, as version DB21M
.
Later revisions, referred to under the broader label DB21
, improve the DB21M
by:
HUT
(v3.15); which is backwards compatible and removes the need for an additional resistor on the top button;MPU-9250
to MPU-6050
due to global chip shortages (2021-2022 chip crisis).To assemble a DB21
Duckiebot, follow these instructions.
You can obtain a DB21
Duckiebot from the Duckietown project shop.
DB21M
Modified 2021-09-26 by tanij
The DB21M
is the first Duckiebot equipped with a NVIDIA Jetson Nano 2 GB computational unit instead of a Raspberry Pi.
The DB21M
debuts in 2021 with the first edition of the massive open online course, hosted on the edX platform.
The DB21M
is readily recognized by its blazing blue chassis and triple-decker configuration. It is equipped with a sensor suite including: camera, time-of-flight sensor, inertial measurement unit (IMU) and wheel encoders. Moreover, the DB21M
features new electronics (HUT v3.1, front and back bumpers), a screen, a button and a custom designed Duckiebattery (not to be confused with the Duckie-power-bank).
To assemble a DB21M
Duckiebot, follow these instructions.
You can obtain a DB21M
Duckiebot from the Duckietown project shop.
DB19
Modified 2021-09-26 by tanij
The DB19
is the latest version of the Duckiebot. You have a DB19
Duckiebot for sure if you have the blue motors shown in figure Figure 2.2.
Apart from the new motors and another HUT (v. 2.1), the DB19
is identical with the DB18
. A complete version can be seen here:
To assemble a DB19
Duckiebot, follow these instructions.
You can obtain a DB19
Duckiebot from the Duckietown project shop.
DB18
Modified 2020-04-03 by Rafael Froehlich
You have a DB18
Duckiebot if, e.g., you have pledged to the Kickstarter.
There are two configuration of the DB18
.
DB18
configurationModified 2021-09-26 by tanij
The main configuration is labeled plainly as DB18
and is designed to operate on any Duckietown. You have the DB18
if, e.g., you are a student attending the 2019 graduate level classes in ETH or the University of Montreal, or you have pledged to Summer 2018 Kickstarter.
The DB18
supports different power bank models depending on the geographical region, but all these solutions are functionally equivalent, although their form factor is different.
You can recognize a DB18
from previous versions for having only one board in addition to the Raspberry Pi, a backplate, and the computational stack mounted in the bottom deck.
To assemble a DB18
Duckiebot, follow these instructions.
You can obtain a DB18
Duckiebot from the Duckietown project shop.
DB18-Robotarium
configurationModified 2020-09-13 by Jacopo Tani
The DB18-Robotarium
configuration adds to the DB18
the hardware necessary to operate in Robotariums (a.k.a. Duckietown Autolabs): continuously operating Duckietowns. They are otherwise identical to the DB18
.
The additional hardware consists of a top localization April Tag infrastructure and an “auto-charging” mod, which allows Duckiebots to dock to charging stations and estimate the residual battery charge.
Robotariums are experimental Duckietown features, currently under development. You will find DB18-Robotarium
models in university research labs.
If you are interested in obtaining DB18-Robotarium
Duckiebots, or in building your Duckietown Robotarium, contact the Duckietown team.
DB17
Modified 2021-03-13 by duckietown
In the DB17
version, we had several several different configurations.
The configurations are defined with a root: DB17-
, indicating the “bare bones” Duckiebot used in the Fall 2017 synchronized course, and an appendix y
which can be the union (in any order) of any or all of the elements of the optional hardware set w
, j
, d
, p
, l
, c
.
A DB17
Duckiebot can navigate autonomously in a Duckietown, but cannot communicate with other Duckiebots.
The elements of are labels identifying optional hardware that aids in the development phase and enables the Duckiebot to talk to other Duckiebots. The labels stand for:
w
: 5 GHz wireless adapter to facilitate streaming of images;
j
: wireless joypad that facilitates manual remote control;
d
: USB drive for additional storage space;
c
: a different castor wheel to replace the preexisting omni-directional wheel;
p
: PWM hat for convenient powering of the DC motor hat;
l
: includes LEDs, LED hat, bumpers and the necessary mechanical bits to set the bumpers in place. Note that the installation of the bumpers induces the replacement of a few DB17
components;
During the Fall 2017 course, three Duckietown Engineering Co. branches (Zurich, Montreal, Chicago) are using these configuration naming conventions. Moreover, all institutions release hardware to their Engineers in training in two phases.
It may be convenient at times to refer to hybrid configurations including any of the DB17-jwcd
in conjunction with a subset of the DB17-l
components. In order to disambiguate, we define partial upgrades as:
DB17-l1
: adds a PWM hat to DB17
, in addition to a short USB angled power cable and a M-M power wire;DB17-l2
: adds a bumpers set to DB17
, in addition to the mechanical bits to assemble it;DB17-l3
: adds a LED hat and 5 RGB LEDs to DB17-l1l2
, in addition to the F-F wires to connect the LEDs to the LED board.introducing the PWM hat in DB17-l1
induces a replacement of the spliced cable powering solution for the DC motor hat. Details can be found in Unit C-16 - Assembly - Duckiebot DB17
.
DB17-l
is the necessary configuration to enable communication between Duckiebots, hence fleet behaviors (e.g., negotiating the crossing of an intersection). Subset configurations are sometimes used in a standalone way for: (DB17-l1
) avoid using a sliced power cable to power the DC motor hat in DB17
, and (DB17-l2
) for purely aesthetic reasons.